Reelmaster® 3100-D with Sidewinder (03171)

Air Filter	Heavy-duty, radial seal air cleaner.
Armrests	Standard
Battery	12V
Bedknife Adjustment	Dual Precision Adjustment (DPA), bedknife to reel.
Blade Style/Type	Reel
Blade Type (Description)	EdgeSeries™ DPA radial reels.
Cab Unit	N/A
Clip Frequency/Backlapping	Manually controlled, variable reel speed for control of clip frequency. Standard on-board backlapping.
Controls	Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel lock, PTO switch, throttle, joystick control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder equipped models), cutting unit transport lock, reel speed and backlap control knob.
Cooling System Description	Rear mounted radiator.
Cup Holder	Standard
Cutting Unit Accessories	Rear Roller Brush Kit, Universal Groomer, Broomer, Grass Baskets
Cutting Unit Lift/Lower	Hydraulic – front and rear cutting unit lift/lower are sequenced for uniform starting and ending points.
Cutting Unit Offset	Maximum 15″ (38 cm) in 72″ (183 cm) width of cut. Maximum 22″ (56 cm) in 85″ (216 cm) width of cut.
Cutting Unit Type/Configuration	Three hydraulically-driven, balanced, 7″ (17.8 cm) diameter reels. Cutting units interchangeable to all three positions. Operator controlled moveable cutting units travel ±12″ (30 cm) left or right from center; total of 24″ (61 cm) of infinite variability. 72″ (183 cm), or 85″ (216 cm) width of cut dependent on cutting unit selection.
Drivetrain	Diesel
Electrical System	12-volt, 585 cold cranking amps at 0 deg. F (-18 deg. C), 40 amps with regulator/rectifier.
Engine Cooling	Liquid Cooled
Fuel / Power Source	Diesel / Biodiesel
Fuel Capacity	7.5 U.S. gal. (28 .4 L)
Fuel Filter	Fuel filter with fuel/water separator with visible bowl.
Gauges/Instrumentation	Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights. Low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).
Ground Speed – Forward	0 – 9 mph (0 – 14 km/h)
Ground Speed – Reverse	0 – 4 mph (0 – 6.4 km/h)
Height	76″ (193 cm) with ROPS
Height of Cut Range	Floating Position (Standard) 8-Blade: 0.5″ – 2.0″ (13 mm – 51 mm) 11-Blade: 0.25″ – 0.75″ (6 mm – 19 mm) Fixed Position 8-Blade: 1.25″ – 2.0″ (32 mm – 51 mm)
Hydraulic Fluid Capacity	6 U.S. gal. (22.7 L)
Hydraulic Fluid Type	Toro PX™ Extended Life Hydraulic Fluid
IntelliDash™ Capable	No
Interlocks	Traction pedal, operator presence in seat, PTO engage or disengage, and cutting unit mow or transport safety interlock switches.
Lighting	Optional
Main Frame/Chassis	Formed steel, welded steel and steel tubing.
Max Slope Angle	Refer to operator’s manual.
Mowing Speed	0 – 6 mph (0 – 10 km/h)
Number of Blades	11, 5, 8
Oil Capacity	3.5 U.S. qt. (3.3 L)
Oil Cooler Description	Pressurized lubrication system with 3.5 U.S. qt. (3.3 L) capacity.
Optional Accessories	Sunshade (with optional operator cooling fan, LED work lights, rotating amber beacon)
Parking/Service Brakes	Hydrostatic service brake, hand-operated parking brake.
Power Steering	Yes
Power Train (Engine Description)	Kubota® liquid-cooled diesel, 3-cylinder, 21.5 hp (16 kW) net @ 2500 RPM. High idle: 2,600 rpm, Low idle: 1,400 rpm (+/- 50 rpm). 68.5 cu. in. (1123 cm) displacement. Tier 4 and Stage V compliant.
Product Length	93″ (248 cm)
Reel Diameter	7 in. (17.8cm)
Reel/Cylinder Drive	Hydraulic
Rollers	Full roller standard on rear of cutting unit and plastic front Wiehle roller.
Safety/Operator Safety	Two post ROPS and retractable seat belt standard.
Seat	Two-piece premium commercial two-tone grey vinyl with two arm rests, fore/aft adjustment.
Sidewinder	Yes
Starting	Switch
Steering System Description	Power steering with tilt steering wheel.
Tires – Front	20″ x 12″ – 10″, 4-ply, Turf Tread
Tires – Rear	20″ x 10″ – 10″, 4-ply, Turf Tread
Tool Box	Optional
Traction Drive	3WD
Traction Drive (System)	Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse.
Transport Width	80″ (203 cm) in 72″ (183 cm) WOC, 92″ (234 cm) in 85″ (216 cm) WOC
Weight	with 27-inch Cutting Units: approx. 1,950 lbs. (885 kg)
Wheelbase	56″ (142 cm)
Width of Cut	72″ (183 cm) or 85″ (216 cm)

Reelmaster® 3100-D with Sidewinder (03171)

Call for Pricing

Similar Products

Groundsmaster® 3200 (31900A)

Groundsmaster® 3300 – 37.4hp (27.9kW) with CrossTrax® 4WD (31907)

Groundsmaster® 3300 (31902A)

Groundsmaster® 3310 (31903A)

Groundsmaster® 3500-D (30807)

Groundsmaster® 3505-D (30849)

Groundsmaster® e3200 (31800)

ProLine H800 Direct Collect Mower 50” (127 cm) Cutting Width (31051)