Greensmaster® eTriFlex™ 3370 (04591)

Armrests	Optional
Battery	12V / 48V
Bedknife	Replaceable single edged, EdgeMax™ Microcut Bedknife is standard on all cutting units.
Bedknife Adjustment	Dual screw, indexed “click” adjustment to the reel; detents correspond to 0.0007″ (0.018 mm) bedknife movement for each position.
Blade Style/Type	Reel
Blade Type (Description)	Reels are 5″ (13 cm) in diameter, 21″ (53.3 cm) in length. EdgeSeries™ Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375″ (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut.
Charger	Off-board high efficiency 1200W smart charger. – AC input voltage 100-240VAC – AC input Frequency 50/60 Hz – Max input Current 14 A – Max charge time, empty to full: 9 hrs.
Clip Frequency/Backlapping	Standard, on-board and adjustable speed from 200–520 RPM
Controls	Traction Pedal: Forward/Neutral/Reverse; Joystick: Raise/Lower; Function control switch: Neutral, Mow, Transport; Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors
Cup Holder	Standard
Cutting Unit Accessories	8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options.
Cutting Unit Lift/Lower	48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Center lift actuator drop and raise delay is dependent on machine velocity.
Cutting Unit Type/Configuration	Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Drivetrain	Electric
Electrical System	48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift / lower actuator circuit. 12V system for primary controls and brake actuator. Energy capacity: 10.77 kWh; 48V nominal.
Fuel / Power Source	Electric
Gauges/Instrumentation	InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics.
Grass Distribution	Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions.
Ground Clearance	3.8″ (9.7 cm)
Ground Speed – Forward	0 – 10 mph (0 – 16 km/h)
Ground Speed – Reverse	0 – 5 mph (0 – 8 km/h)
Height	80.8″ (205 cm)
Height of Cut Range	Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062″ – 0.297″ (1.6 – 7.5 mm). With high HOC kit, range is 0.297″ – 1.0″ (7.5 – 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
Implement Drive	Three, 48V (1.1 KW), air-cooled brushless permanent magnet reel motors with separable controller.
Lighting	Optional
Main Frame/Chassis	Three tie-down locations (2 side, 1 rear).
Mowing Speed	0 – 5 mph (0 – 8 km/h)
Number of Blades	11, 14, 8
Optional Accessories	3WD Kit, Light Kit, Light Kit – Front Mount Brackets, Rear Light Kit, Seat Kit (Standard or Premium), Left Armrest Kit (Standard), Armrest Kit (Premium), Canopy, Utility Bag Kit, Wireless Hour Meter, Seat Cover
Overall Width	70.9″ (180 cm)
Parking/Service Brakes	Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake.
Power Steering	Yes
Power Train (Engine Description)	Eight Lithium-Ion batteries.
Product Length	98″ (249 cm) with baskets
RDS™ System	Radius Dependent Speeds – Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending). Lift-In-Turn: Provides level cut from side to side of cutting units regardless of turning angle (patented).
Reel Diameter	5 in. (12.7cm)
Reel/Cylinder Drive	Electric
Rollers	Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2″ (5.1 cm) diameter with sealed bearings and through-shaft.
Safety/Operator Safety	Sound Power: 82 db(A) At Operator’s Ear: 66 db(A)
Starting	Key Start
Steering System Description	48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.
Tires – Front	19″ x 10.5″ – 8″, 4-ply, Smooth Tread
Tires – Rear	19″ x 10.5″ – 8″, 4-ply, Smooth Tread
Traction Drive	2WD
Traction Drive (System)	Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. Optional 3WD. (patent-pending).
Turning Circle (Diameter)	69.8″ (182 cm) clearance to cutting unit motor
Weight	Mow: 1274 lbs (578 kg) Transport: 1,557 lbs (706 kg)
Wheelbase	49.8″ (126.5 cm)
Width of Cut	59″ (150 cm)

Greensmaster® eTriFlex™ 3370 (04591)

Call for Pricing

Similar Products

Greensmaster® TriFlex™ 3420 (04540)

Greensmaster® TriFlex™ 3400 (04520)

Greensmaster® TriFlex™ 3320 (04530)

Greensmaster® TriFlex™ 3300 (04510)

Greensmaster® Flex™ 1021 (04860)

Greensmaster® Flex™ 1018 (04850)

Greensmaster® eTriFlex® 3360 (04580)

Greensmaster® eFlex 1021 (04865)